CONTENTS:
CHAPTER  1  INTRODUCTION
CHAPTER  2  CHECK YOUR SYSTEM
2.1 Check List
2.2 System Requirements
2.3 Distribution Disk Contents
2.4 Backup Your Diskette
2.5 Some Restrictions
CHAPTER  3  PCCOM INSTALLATION
3.1 Device Driver Installation
3.2 Hardware Configuration Specification
3.3 Some Constraints
CHAPTER  4  RUN TIME SUPPORT
4.1 How To Use Device
4.2 Communication Parameters Set up
4.3 Setup and Status Report
CHAPTER  5  FILE TRANSFER
5.1 Transmit File to Remote Site
5.2 Receive Data from Remote Site
5.3 Two Way Communication
CHAPTER  6  PROGRAMMING TECHNICAL
6.1 How to Use Device Driver
6.2 PCCOM Library
6.3 Examples
6.4 I/O Control Via Software Interrupt
6.5 PCCOM DOS IOCTL functions
CHAPTER  7  DIAGNOSTIC PROGRAM
7.1 TESTCOM Diagnostic Program
APPENDIX A  VIRTUAL TERMINAL
A.1 Valid Control Sequence of VT
A.2 Extended Graphics Capability
A.3 How to Execute VT.EXE

A.3.1 Download Data from Host

A.3.2 Upload Data to Host

A.3.3 Setup
A.4 Examples
APPENDIX B  COMMUNICATION PARAMETERS
B.1 Communication parameters
B.2 Serial Ports status
APPENDIX C  SYNTAX SPECIFICATION OF
      HARDWARE CONFIGURATION
C.1 Syntax specification
C.2 Some Constrains on Configuration Rule
C.3 How to install and configure PCCOM driver
APPENDIX D  MULTI-SERIAL PRODUCTS
D.1 PCCOM 4 port card
      PCCOM ISA bus 4 port card
      SafLine 4 port card
D.2 Eight Serial Adapter
D.3 Dual Eight Serial Adapter
D.4 PCCOM 8 port card
      PCCOM ISA bus 8 port card
      SafLine 8 port card
D.5 Standard COM1 and COM2
D.6 SafLine 16 port card
APPENDIX E  WARRANTY INFORMATION
E.1 Copyright
E.2 Warranty Information