THE TOTAL TOOL FOR RS/ 232 COMMUNICATION

Unleash everything in RS-232. You can now discover the protocols behind the detection of devices in serial ports during boot-up of some operating system!!!!!

PCCOM SCOPE is a software that monitor all the data and signals between two interacting devices, or a single device.

With PCCOM SCOPE you can transform your PC into a total RS-232 analyzer without the need of expensive hardware or plug in boards.

PC COM_SCOPE creates an unsurpassed tool for RS-232 device driver, communications protocol and traffic analysis. Unlike other products, RS_SCOPE requires little or no learning difficulties.

PC COM_SCOPE also comes with our terminal box that provides signals splicing and with light indicator of all RS-232 signals.

The Feautres of the PCCOM Scope:
All UART parameters are fully configurable.

Capture data in ASCII, HEX, or EBCDIC data format.

Review received data saved in memory or disk in any data format.

Monitor data and all signals of both devices at same time.

Automatically save the most current 3Kbyte of monitored data to memory.

Monitor the interaction of both devices (Monitor mode).

Monitor data and signals transparently (Transparent mode)..

Send data and signals to one or both devices

PCCOM SCOPE automatically tests UART internally.

PCCOM SCOPE is build with friendly interface for easy learning.

Monitor the number of data and signals transmit and receive.

PCCOM SCOPE will function on any two user defined port address.