PCCOM PCI 2 PORT SERIAL ADAPTER

APPENDIX G
LINUX CONFIGURATION

The PCCOM PCI bus 2 port adapter can be installed in the Linux by using serial device driver supported by Linux. For more details, please refer to 'setserial' man-pages.

Please uncomment the appropriate lines in /etc/rc.d/rc.serial to enable auto-configuration of PCCOM PCI bus 2 port card.

For example, uncomment the following lines for PCCOM PCI bus 2 port card.

${SETSERIAL} /dev/cua4
${AUTO_IRQ}autoconfig${STD_FLAGS}

${SETSERIAL} /dev/cua5
${AUTO_IRQ}autoconfig${STD_FLAGS}