APPENDIX F
LINUX CONFIGURATION

The PCCOM 2 port adapter can be installed in the Linux by using serial device driver supported by Linux. For more details. please refer to 'setserial' man-pages.

Please nucomment the appropriate lines in /etc/rc.d/rc.serial to enable auto-configuration of PCCOM PCI bus 2 port card.

For example, uncomment the following lines for PCCOM PCI bus 2 port card.

${SETSERIAL}  /dev/cua4 ${AUTO_IRQ} autoconfig${STD_FLAGS}
${SETSERIAL}  /dev/cua5 ${AUTO_IRQ} autoconfig${STD_FLAGS}